Why Mach 2 Stands Out

  • Track Any Flight

    Enter a flight number to follow a specific plane in real time, or let the display automatically show flights passing overhead.

  • ESP32 Powered

    Built on the ESP32-S3 for fast boot times, smooth animations, and reliable performance — no Raspberry Pi, no SD cards, no fuss.

  • Free OTA Updates

    New features, display modes, and improvements are delivered automatically over Wi-Fi. No subscriptions, no manual updates — ever.

  • Fully Customizable

    Adjust brightness, tracking area, flight filters, and display modes from a built-in settings dashboard on any device.
Shop Now

See It in Action

Front view of the Flight Radar LED Display showing real-time flight data like air speed

Set Up in Minutes

Plug in a USB-C cable, open your browser, connect to Wi-Fi — done. No apps, no accounts, no Bluetooth pairing. The guided setup at setup.flighttrackerled.com walks you through everything in Chrome or Edge.

View Setup Guide

Three Steps to Live Flight Tracking

  • Connect via USB

    Plug in the USB-C cable and open setup.flighttrackerled.com in Chrome or Edge. Click Connect Device to pair your display.

  • Join Your Wi-Fi

    Scan for networks, select yours, enter the password. Your Flight Tracker connects and you can unplug the USB cable.

  • Set Your Location

    Open the built-in dashboard from any device on your network. Search your address to set your tracking area automatically.

Engineered for Everyday Use

Mach 2 replaces the complexity of a Raspberry Pi build with purpose-built ESP32-S3 hardware, a guided setup flow, and ongoing OTA improvements. The result is a polished, ready-to-use display — handmade, tested, and built to keep getting better after it arrives.

FOR MAKERS & DEVELOPERS

Mach 2 Dev Kit

The same ESP32-S3 hardware that powers Flight Tracker Mach 2 — shipped as a bare development platform for you to build on. Write your own firmware, experiment with the HUB75 LED matrix, or use it as a starting point for any connected display project.

What's included: ESP32-S3 controller, 64×32 HUB75 LED matrix, USB-C cable, and full pinout documentation. No pre-loaded flight tracking firmware — bring your own code.

Shop the Dev Kit

Common Questions

What is Flight Tracker Mach 2?

A handmade ESP32-powered LED display that tracks flights in real time. Follow any flight by number, watch planes overhead, switch between display modes, and get free OTA updates for life. No subscriptions.

How does setup work?

Plug in via USB-C, open setup.flighttrackerled.com in Chrome or Edge, and connect to Wi-Fi. Takes about 3 minutes. No apps, no accounts, no Bluetooth.

Is there a monthly fee?

No. Flight Tracker Mach 2 is a one-time purchase. Flight data, OTA updates, and support are all included free — forever.

View All FAQs